The Triangular Equalizer # TREQ310 is a replacement for the Dexter 13-10 on your 2022 Nash 23D travel trailer. You should consider upgrading to the MORryde ALLTREK 4000 Shock Absorbing Equalizers # MR89DR. These will pair with either the 2-1/4" # MR46ZR or 3-1/8" # MR76ZR shackle kits depending on the length from center hole to center hole on your shackle links.
While we do not carry the same KYB shocks installed by Nash we do have the Lippert Bolt-On Shock Kits. These are available for... view full answer...
It sounds like you have a 1998 Nash 26J. Based on what I have found this has a GVWR of 7,000 lbs which tells me you have 3,500 lb axles. Assuming that is the case, you will more than likely need Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100. This kit has the standard bearings and grease seal for a 3,500 lb axle.
The only way to truly be sure is to check your current bearings and grease seal. You can pull the hubs and either look for the part... view full answer...
It sounds like you are looking for a snap in plug like the # LHSI60C which fits on a Wheel Center Cap # LHCS102-SI60C. Unfortunately I have no way to see exactly what parts were installed by the manufacturer for your 2009 Quicksilver Livin-Lite 5.0 Tent Trailer. Instead I can tell you the plug fits a 2" hole while the center cap fits a wheel with 5 lugs and a 3.19" pilot diameter.
If this is different than the sizes you have or you are looking for something different please let me know. view full answer...
Go To Results